> 普通干燥机干燥时，由于原料是静止的，热风穿透不充分，只在局部受热，原料易结块，造成堵塞，故无法达到全面干燥的效果。本机的设计为两级螺旋快速输送，第一级将原料快速递入桶内，第二级再将原料不停快速提升到桶体上端以伞状飞抛散落，而热风则从桶体下部的中心向四周吹出，顺利的从移动原料的缝隙中自下向上穿透原料进行全面热交换的动态干燥过程。
> 由于原料在桶内不停的翻滚，热风不停的从中心输送从而达到混合与干燥的同步进行，节省时间和能源。如不需干燥，只要关掉干燥开关，仅使用混合机功能，本机亦适用于粒料与粉碎料、色母粒的混合。
> 桶体和螺旋叶片、轴、筒、支架等和原料接触的部分均匀采用不锈钢制作。
> 当需要清料时，可将清料口打开，并使螺旋反转起动干燥风机，可达到清料的简单操作。
Properties:
> In drying by normal drying machine, since the material is still, hot wind penetration is insufficient, the material is partially heated. The material will agglomerate easily and result in jams and blocks, so complete dry effect can not be reached. The design of this machine includes two stages of spiral rapid transports. The first stage is to move the raw material to the barrel. The second stage is to rapidly lift the material to the top of barrel and scatter it in shape of umbrella., hot wind will blow around from the center of the bottom of the barrel. Hot wind will blow upwards and penetrate the raw material, dynamic drying with complete heat exchange is conducted.
> Since the raw material in the barrel is continuously rolling, hot wind is continuously blowing from the center, so mixing and drying is synchronously conducted, so it saves time and power. If drying is not needed, dry switch can be turned off, then the machine has only function of mixing. This machine can also be used for mixing of granulate material and powder material.
> The barrel body, spiral vanes, shaft, cylinder, support frame and the parts which touch the raw material are all made of stainless steel.
> When the material need clearing, open the material clearing opening and let the spiral vanes rotate in counter direction. Material clearing can therefore be simply operated.